2011 Land Pride RC3615

<< Back to 2011 Land Pride Rotary Cutters

2011 Land Pride RC3615

The RC3615 and RCM3615 Series Rotary Cutters provide excellent cutting performance on gently sloping or slightly contoured right-of-ways, pastures, set-aside-acres, or row crop fields. The 15' cutting width and ability to cut weeds and brush up to 2" in diameter make them well suited for these applications.

The 36 Series offers a pull-type self leveling tongue with a clevis hitch for attachment to 50-160 hp tractors, and features a Cat. 5 main driveline. Safety guards around the cutter are offered in either chain or rubber.

Pricing/Color Information

Orange
Red
Green
Tan

Features

All

Surpassed rugged industry standards; All Land Pride Rotary Cutters have been designed and tested and meet rigorous voluntary testing procedures.

Mostly factory assembled; Arrives for quick and easy set-up. Minimal time is wasted setting or prepping the unit.

5 Year gearbox warranty; Shows confidence in gearbox integrity.

Gearbox seal protection; Gearbox bottom seal protection for longer bearing life.

Smooth Top Design; Allows for easy cleaning of deck.

Low tongue weight; Ideal for smaller HP tractors by reducing the amount of weight on the drawbar.

Narrow tongue construction; Allows for a tighter turning radius.

Input Driveline: Cat. 5 CV; Driveline is matched just right for capacity of tractor. Constant velocity (CV) U-joint allows for 80 degree turns without doing damage to the driveline.

Wing driveline: Cat. 4 with slip-clutch; Driveline is sized right for the intended cutting capacity. Slip-clutch will slip under load instead of twisting the driveline. (Optional Cat. 5 driveline is available.)

Slip-clutch drivelines; Slip-clutches are designed to slip to minimize twist damage to the driveline profiles.

High Blade tip speed; Allows clean cutting of material.

6” Blade overlap; Eliminates skipping during turns.

Left wing rotates clockwise; Better discharge of material. Picks up tractor tracks.

3/16” Round stump jumper; Standard thick stump jumper material keeps damage to a minimum.

1/4” Sidewall thickness; Increased thickness reduces damage from objects being thrown into deck sidewalls.

Self-leveling hitch; Reduces drawbar wear by keeping hitch level while going through ditches.

Hinged wing sections; Allows cutter to follow terrain. Ideal for rough ground where hillsides, ditches and hollows can cause uneven cutting.

1” Solid hinge rods; Larger diameter hinge rod gives greater strength to the cutter from front to rear, and in the hinge area itself.

Wing transport locks; Wing transport locks securely hold the wings in the folded position in case of hydraulic failure.

Enclosed front to rear dual leveling rods; Dual leveling rods enable the cutter to pull equally on the rear axle during travel over rough terrain.

5-Bolt hubs; 5-Bolt hubs makes the wheel assembly more durable and longer lasting.

Spring cushioned center-axle; Protects unit from bumps and ground shock.

Replaceable wheel spindles; Wheel spindles can be replaced when damaged without replacing the entire axle assembly.

Wheel options; Laminated tires: Eliminates flats. Airplane tires without foam filling: Give better cushion while transporting. Airplane tires with foam filling: Give better cushion while transporting and can’t go flat. 15" Wheel rims: Can mount your own tires.

Double swivel clevis hitch; Great for uneven terrain, reduces drawbar wear. Hitch pivots freely up and down and pivots about the tractor drawbar.

Bar-tite hitch; Ideal hitch for extreme conditions. Clamps tight to the drawbar eliminating any drawbar wear. Hitch pivots freely up and down and pivots about the tractor drawbar.

2011 Land Pride RC3615

Specifications

Transmission

Driveline
(Input Driveline 540 & 1000 PTO) - ASAE Category 5 with constant velocity u-joint or conventional (non-cv) u-joint
(Intermediate & Wing Drivelines) Standard - Category 4 with Slip-Clutch

Dimensions

Thickness
(Deck Material) - 10 gauge
(Side Skirt) - 1/4"
Cutting Capacity
2 1/2”
Weight
(Machine) - Hitch weight = 1,300 lbs
Total weight = 3,840 lbs.
Blade Tip Speed
At 540 RPM Center Blades = 15,268 FPM & Wing Blades = 15,000 FPM
At 1000 RPM Center Blades = 15,578 FPM & Wing Blades = 14,620 FPM
Width
(Overall) - 15’-9”
(Minimum Transport) - 7’-11 3/4”
Length
(Overall) - 15’-5 3/4” (With center deck raised fully up)
Deck Height
12”

General Information

Cutting Height
2” - 14”
Lift
(Hydraulics) 3" x 8" hydraulic cylinder, hoses, fittings & stroke control spacers
Wings
(Wing Hydraulics) 2 1/2" x 12" hydraulic cylinders, hoses & fittings
(Wing Transport Protection) Wing Transport Locks
Hitch
(Weight) 1,240 lbs.
(Types) Standard Clevis, Double Swivel Clevis, Bar-Tite, Ball or Pintle Hitch
(Jack) - Standard (5,000 lbs.)
Cutting Width
15’
Skid Shoe
Wing Deck: 1 Replaceable shoe per wing
Center Deck: 2 Replaceable shoes
Blades
- 6 (2 per Carrier) 1/2” x 4” Heat Treated
Free Swinging Alloy Steel with Uplift
(Overlap) 6"
(Bolt) Keyed with hardened flat washer & lock nut
(Stump Jumper / Blade Holder) 3/16" Thick round dish shaped pan, reinforced with 1" x 4" blade bar
Gear Box
(Horsepower) - 540 RPM or 1000 RPM
160 HP Divider
110 HP Center & Wings
Lubrication
(Gear Box) - Gear Lube 80-90W EP
Number Wheels
6 - Wheels: 4 on transport axle and 1 on each wing axle

Power Take-Off (PTO)

HP
(Min.) 50

Photos

Request a quote for: 2011 Land Pride RC3615

Estimated Time For Purchase:*
If you see this field, leave it blank:
Characters Remaining

While we attempt to ensure display of current and accurate data, this listing may not reflect the most recent transactions or may reflect occasional data entry errors. All inventory listed is subject to availability and prior sale. Please consult dealership personnel for details. Prices are quoted for the US only and may not include dealer preparation, transportation, taxes, or other applicable charges. Photographs may be representative only and may vary somewhat from the actual items offered for sale.