Brillion HSBA71-1

Double tap to zoom

5 to 13 Shank Rigid Frame Models Available
Flip-Flop Style Hitch
A-Frame Drawbar
Ratchet Jack Frame Leveling
Single Point Depth Control
4" x 4" Square Tube Weighted Frame
29" Under Frame Clearance
Walking Tandem Axles Provide for a Smooth Ride (Model Dependent)
20" Coulter Blades Spaced at 7.5"
7.5" Solid Cast Iron Spools Provide Extra Weight to Cut Through the Toughest Residue
1.5" Square Gang Bolt Prevents Coulters from Sliding in Wet Conditions
Hydraulic Depth Control for Coulters (Model Dependent)
Dual Nested Spring Shanks Trip up to 5.5"
Spring Pressure/Trip Resistance is Adjustable from 550 to 825 lbs.
Maximum Operating Depth is 10"
One Piece 4" Twisted Shovels Standard Equipment
Safety Warning Lights
Powder Coat Paint

Model	HSBA71-1
Approximate Weight	4,879 lbs. (2,213 kg)
Working Width	8 ft. 9 in. (2.67 m)
Transport Width	9 ft. 3 in. (2.82 m)
Transport Height	5 ft. 7 in. (1.70 m)
Overall Length	19 ft. 3 in. (5.87 m)
Number of Coulter Blades	15
Coulter Blade Diameter	20 in. (508 mm)
Coulter Blade thickness	7 ga.
Coulter Blade Spacing	7.5 in. (191 mm)
Coulter Bearings	Self-Aligning Flange Type
Coulter Protection	Compression Coil Spring
Coulter Gang Bolt	1.5 in. (38 mm) Square
Number of Shanks	7
Shank Mount	Dual Nested Spring
Shank Type	Parabolic
Shank Spacing	15 in. (381 mm)
Shank Working Depth	Maximum of 10 in. (254 mm)
Spring Pressure/Trip Resistance	550 lbs. to 825 lbs. (248 kg to 371 kg)
Chisel Points Available	4 in. (102 mm) Twisted Shovels
Under Frame Clearance	29 in. (737 mm)
Frame Structure	4 in. x 4 in. x .25 in. (102 x 102 x 6.35 mm)
Rock-shaft Pivot Bearings	Two Piece Cast Iron
Transport Axle Type	Single Tire
Main Frame Cylinders	3.5 in. x 16 in. (89 x 406 mm)
Main Frame Cylinder Control	External Depth Stop
Coulter Depth Cylinders	3 in. x 8 in. (76 x 203 mm)
Coulter Depth Cylinder Control	Depth Control Segments
Tires	(2) 11L x 15-8 Ply
Hitch Pin Hole Diameter	1.563 in. (40 mm) Flip-Flop Style Hitch
Safety Warning Lights & SMV Emblem	Standard
Safety Chain	Standard
Powder Coat Paint, Red	Standard
Horsepower Requirements	15 to 20 HP (11 to 15 kW) per Shank
Recommended Operating Speed	5 to 6.5 MPH (8 to 10.5 km/h)