Land Pride DZ3084

Double tap to zoom

Universal Quick Attach-Hitch, Meets ISO 24410	Design for quick and easy attachment to most skid steers and track loaders
Choice of 84" or 96" working widths	Allows customers to choose the blade that meets their operational needs.
Blade pivots hydraulically 6-ways	Hydraulic adjustment provides for quick and easy blade positioning. Blade adjust 6-ways to meet the operator’s needs.
Reinforced 3/8" moldboard with fully boxed bracing	Provides added strength and durability.
3 1/2" Double acting welded hydraulic cylinders	Easily enables angling up to 30 degrees left or right, and tilts 10 degrees up or down. The material can easily be distributed where you want it to go.
Standard operator mounting step	Provides for safer and easier mounting into and dismounting from the skid steer cab.
26 1/2" Overall moldboard height	Provides ability to perform in deeper material conditions
Replaceable bottom wear edge	Protects underside of moldboard against wear.
Reversible and replaceable 3-piece cutting edge	3-Pieces so that the end user can replace the entire cutting edge or just the high-wear corner sections to reduce maintenance cost.
Heavy 3" diameter pivot pins with greasable hardened spring bushings	Large diameter pivot pins stand up to rugged use. Lubrication helps protect against wear and rust seizing. Hardened bushings can be replaced if needed.

Model Number	DZ3084
Weight	1345 lbs (610.1 kg)
Hitch type	Skid steer type Universal Quick-Attach, meets ISO 24410
6-Way blade adjustment	Top of hitch plate tilts forward or backward. Blade angles left or right. Blade tilts clockwise or counterclockwise.
Maximum blade angle	30 degrees left and 30 degrees right
Maximum blade tilt	10 degrees clockwise and 10 degrees counterclockwise
Cylinder size	3 1/2" bore x 8" stroke
Maximum hydraulic pressure	3500 psi (24.13 MPa)
Maximum blade cutting width: At straight across At 30-degree angle	84" (2.13 m) 72 3/4" (1.85 m)
Moldboard thickness	3/8" (10 mm)
Moldboard height	26 1/2" (67.3 cm)
Pivot bushings	Replaceable and greasable, hardened spring bushings
Pivot pin sizes	Angle pin = 3" x 11 5/8" lg. Pivot pin = 3" x 2 13/16" lg.
Cutting edges End cutting edges Center cutting edge	3/4" x 8" x 8 1/2" (1.9 cm x 20.3 cm x 21.6 cm) 3/4" x 8" x 66" (1.9 cm x 20.3 cm x 1.68 m)
Wear edge	1/2" x 4" x 84" (1.3 cm x 10.2 cm x 2.13 m)