Land Pride EA20

New Equipment / All Lines / Land Pride / CE Attachments / EA20 Excavator Augers / EA20

Double tap to zoom

Features
Specifications

Features

Features	Benefits
Optional auger mounts	Fits a wide range of Kubota excavators with a mechanical quick attach coupler mounted on the end of the arm. Easy hook-up and unhook capabilities. Excavator boom & arm can be used to apply additional down force.
Optional cradle	Supports the auger while traveling. Keeps the auger from swing erratically. Allows the auger to be carried low without hitting the ground or other protrusions.
Maneuverability	Excavator Augers are able to reach over fences or other obstructions.
Planetary gearbox	Gearbox is completely sealed with all moving parts running in oil for constant lubrication.
Patent pending vertical indicator	Indicates when auger is vertical, makes it easier to drill straight vertical holes.
2" Hex output shaft	High torque resistance.
Choice of three drive motors	Three flow ranges: 6-15 gpm, 10-20 gpm, and 15-30 gpm Covers a wide range of Kubota excavators.
Hydraulic hoses routed out top of motor/gearbox housing	Allows motor/gearbox housing to follow auger into hole and dig a deeper hole without damaging hoses.
Large selection of augers	Variety of Dirt, Tree, and Rock Auger sizes and styles to suit many applications
Replaceable hardened steel pilot points on dirt augers	Hardened points will last longer than non-hardened. Points are replaceable. Fish tail tips and steel point make it easier to start a hole.
Replaceable carbide pilot points & teeth on rock augers	Points are designed for cutting through rock and are replaceable.
Accessories
Large selection of bolt-on rock heads	Pengo Dirt Augers can be converted to Rock Augers with this accessory.
Two auger extensions	Available in 2 lengths (24" & 48") Increases the depth of hole the auger can dig by 24" or 48".

Specifications

Specifications & Capacities	EA20
Hydraulic requirements	6-30 gpm (22.7-113.6 lpm) @ 1500 to 3500 psi (10.3 to 24.1 MPa)
Base weight without Options	46 lbs (20.9 kg)
Auger flighting thickness	5/16" (8 mm)
Auger pipe	2 1/2" (6.4 cm) ID
Auger teeth	Forged, individually replaceable 40 Degree angle installed on flat side 50 Degree angle installed on angled side
Auger drive	Hydraulic
Gearbox	Hydraulically driven planetary gearbox; reversible
Gearbox output shaft	2" (5.1 cm) Hex
Gearbox API-GL-5 oil weight	SAE 90 @ 35o F (35o C) min. temperature
Gearbox oil capacity	14 oz. (414 mL)