Land Pride TE35108

New Equipment / All Lines / Land Pride / Dirtworking / TE35 Series Trip Edge Blades / TE35108

Double tap to zoom

Features
Specifications

Features

Features	Benefits
Reinforced 7 gauge (4.6 mm) moldboard design	Provides added strength and durability.
Choice of 96"(2.44m) or 108" (2.74 m) working widths	Allows customers to choose the cutting edge that meets their operational needs.
Double acting angling cylinders	Easily enables up to 30 degrees of angling to left or right distributing the material where you want it to go.
Cushion valve	Protects hydraulic cylinders and frame against hydraulic pressure spikes exceeding 1600 psi (11 mPa) caused when striking solid objects at the outer ends of the cutting edge.
Trip edge design with adjustable springs	Protects the structural integrity of the cutting edge while still maintaining load control no matter what the bottom edge encounters.
Easy attach mounting system	Designed for skid steer loaders with skid steer type mounting plates.
Rotational free pivot float action cutting edge design	Allows cutting edge to rotate on its mounted trunnion keeping the cutting edge in uniform contact with the ground.
Pivot float lock	Keeps cutting edge level when in transport for better operator visibility and safer handling.
Cast grip steps	Provides for safer and easier mounting and dismounting by the operator with the Trip Edge Blade attached.
30" (76.2 cm) overall moldboard height	Provides ability to perform in deep snow conditions
Replaceable cutting edge	Offered in steel or heavy-duty poly construction to match ground & surface operating conditions.
Abrasion Resistant Skid shoes	Offered as standard equipment. Abrasion resistant to last longer. Establish lower limits of cutting edge operation to prevent surface gouging or cutting too deep.
Optional cable filled orange markers	Provides operator with improved awareness and visibility of outermost edges of the moldboard and cutting edge to prevent unwanted contact with ground obstacles. Filled with a steel cable for longer life.
Optional top-mounted rubber deflector	Helps prevent snow from over-topping the moldboard in deeper snow conditions.

Specifications

Model	TE35108
Skid steer horsepower	Minimum 60 hp (45 kW) Maximum 100 hp (75 kW)
Hitch type	Skid steer type quick attach, meets ISO 24410
Hitch mounting steps	Serrated
Moldboard construction	7 Ga. (4.6 mm) Steel
Moldboard height	30" (76.2 cm)
Maximum cutting width	108" (2.74 m)
Cutting width @ 30o angle	93" (2.36 m)
Maximum pivot angle	30° left & 30° right
Hydraulic angle cylinders	Two double acting cylinders, 2 1/2" bore x 8" stroke
Maximum hydraulic pressure rating Hydraulic cylinders Hydraulic hoses and fittings	3500 psi (24.1 mPa) 4000 psi (27.6 mPa)
Maximum float angle	Floats on the skid shoes 5o clockwise & 5o counterclockwise
Trip Edge Blade pivot pin sizes Angle pivot pin Float pivot pin	1.75" 2"
Cutting edge options	5/8" (16 mm) x 8" (20.3 cm) high carbon steel 1" (2.5 cm) x 8" (20.3 cm) ultra-high-molecular-weight polyethylene (UHMW) Cutting edges are reversible and replaceable
Trip Edge Blade protection	Adjustable spring-loaded, trip edge
Trip release pressure	1800 lbs (816 kg)
Skid shoes	Adjustable, constructed of 5/8" (16 mm) abrasion resistant steel
Base equipment weight	1134 lbs (514.4 kg)
Optional equipment weight Steel cutting edge Poly cutting edge Deflector Blade marker	154 lbs (69.9 kg) 57 lbs (25.9 kg) 27 lbs (12.2 kg) 2 lbs (.9 kg)