Land Pride SC2572

Double tap to zoom

 

Features

Features Benefits
Low volume motor @ 11-17 gpm
Medium volume motor @ 18-23 gpm
High volume motor @ 24-30 gpm
Customer can chose one of three optional motors (low, medium and high volume) for his SC2560 or SC2572 cutter. This allows the cutter to fit a wide variety of Skid Steers. Also the deck can be upgraded to a different motor when owner upgrades his Skid Steer
Case drain Protects gearbox
1/4" Side panels for overall reinforcement Protects sides from debris being thrown against them from the blades.
Front and rear chain shields Single chain on the front and double chain on the rear. Reduces flying debris.
Replaceable skid shoes (optional) Protect side plate structure. Shoes are replaceable for convenience.
Splined blade bar Allows for tight positive fit of stump jumper and blade bar to motor output shaft.
3/16" Round stump jumper Standard stump jumper aids in sliding over obstructions, which helps protect gearbox output shaft.
1/2" x 4" Heat-treated free swinging blades Heat-treated blades offer longer life. Free swinging blades protect from obstructions.
2" Diameter cutting capacity Can aid in clearing brush.
SC2572 High blade tip speed Low volume motor = 18,225 fpm at 17 gpm.
Medium volume motor = 19,487 fpm at 23 gpm.
High volume motor = 19,699 fpm at 30 gpm.
Offset hitch (8 1/2" to the right) Allows the operator to cut close to obstacles on the right side.
Optional front gauge wheel Provides easy operation and handling over uneven terrain, laminated tire can't go flat.
Polycarbonite door (optional) Protects operator from thrown objects.
Floating hitch mounting plate Allows smoother travel over rough terrain with the optional gauge wheel easing the fatigue put on the operator.
Motor pressure gauge Allows the operator to ensure that the motor is operating at proper psi.
Lift limit safety chain Provides additional operator protection from flying objects by allowing the Rotary Cutter to only be lifted up to 18".

Specifications

Model Number SC2572
Cutter weight without skid shoes, gauge wheel, & protective door 1098 lbs (498.0 kg)
Gauge wheel weight (Optional) 129 lbs (58.5 kg)
Skid shoe weight (Optional) Standard skid shoes = 10 lbs (4.5 kg) Heavy-duty skid shoes = 21 lbs (9.5 kg)
Protective door weight (Optional) 10 lbs (4.5 kg)
Hitch Universal floating-hitch mounting plate. Hitch plate can be mounted centered on the deck or mounted to offset the deck to the right 8 1/2" (21.6 cm).
Cutting width 72" (1.83 m)
Overall width 78" (1.98 m)
Overall length 91" (2.31 m)
Cutting height 1 1/2" to 18" (3.8 cm to 45.7 cm) infinitely variable.
Cutting capacity 2" (5.1 cm) Diameter
Gearbox oil capacity & lubrication 6 Pints (2.84 L) of EP 80-90 wt. gearlube
Spindle hub oil Does not apply
Low volume drive motor 11-17 gpm (41.6-64.4 lpm) flow
Medium volume drive motor 18-23 gpm (68.1-87.1 lpm) flow
High volume drive motor 24-30 gpm (90.8-113.6 lpm) flow
Hydraulic pressure 1500 to 3500 psi (10.34 to 24.13 MPa)
Deck thickness 10 Ga. (3.4 mm)
Side skirt construction 1/4" (6 mm) Steel
Deck wear protection (Optional) Optional four corner mounted skid shoes.
Skid shoes construction (Optional) Standard-duty skid shoes = 1/4" x 2" (6 mm x 5.1 cm) steel Heavy-duty skid shoes = 3/8" x 3" (1 cm x 7.6 cm) steel
Dishpan Heavy duty round pan stump jumper.
Blade size 1/2" x 4" (1.3 cm x 10.2 cm) updraft.
Blade rotation Clockwise
Blade Bolt 1 1/8"-12 x 3 7/16" with key.
11-17 gpm motor blade tip speed
18-23 gpm motor blade tip speed
24-30 gpm motor blade tip speed
18,225 fpm (92.6 mps) at 17 gpm (64.4 lpm)
19,487 fpm (99.0 mps) at 23 gpm (87.1 lpm)
19,699 fpm (84.8 mps) at 30 gpm (113.6 lpm)
Front deck protection Single row chain guard.
Rear deck protection Double row chain guard.
Deck lift height protection Safe chain limiter.
Cutting height gauging (Optional) Pivoting and adjustable front mounted gauge wheel with laminated tire.