Landoll 2112-15

Double tap to zoom

 

Features

Size Heavy Residue and Eliminate Compaction

  • 22” Coulters on 7 ½” Spacing with Depth Gauge Indicator
  • 1 ¾” Gang Bolt
  • 5 ¾” Solid Cast Spools
  • C-Cushion Bearing Standards with Trunnion Bearings with Triple Lip Seal
  • Scraper Mounted Bracket Attached to C-Cushion Bearing Standard
  • Auto-Reset Shank Assemblies with 1,750 lb. Point Load, 14” Trip Height, 32” Under Frame Clearance, Adjustable 50 or 60 Degree Point Angle
  • Rigid Shear Bolt Shanks with 32” Under Frame Clearance
  • Choice of Twisted Shovels or Straight Points
  • 5 ½” Lift Axles with Maintenance Free Lift System
  • Walking Tandems with Greaseable Bearings on all Sizes
  • 340/65R x 18 Radial Tires with 8-Bolt Hubs and 3” Slip-In Spindles on Rigid Models and Wings of Folding Units
  • 400/60R x 18 Radial Tires with 8-Bolt Hubs and 3 ¼” Slip-In Spindles on Center Sections of Folding Units
  • Self-Leveling Hitch with Manual Adjustment
  • Single Point, Front Mounted Depth Control
  • Adjustment and Gang Wrench
  • Sapphire Blue Powder Coat Paint

Specifications

2100 Series Coulter Chisel with Auto Reset Shanks

Product Attributes 2112-15
Approximate Weight 19,050 lbs. (8,640 kg)
Working Width 18 ft. 9 in. (5.7 m)
Transport Width 19 ft. 4 in. (5.9 m)
Transport Height N/A
Number of Coulter Blades 31
Blade Spacing 7.5 in. (191 mm)
Blade Size 22 in. x 0.25 in. (559 x 6.4 mm)
Coulter Protection Spring Cushioned/C-Flex
Blade Scrapers Heavy-Duty 0.3125 in. x 6 in. (7.9 x 152 mm)
Blade Scraper Mount C-Cushion Mounted
Gang Spools 5.75 in. (146 mm) Diameter Solid Cast
Gang Shaft 1.75 in. (44.5 mm) Round
Number of Bearings 8
Gang Bearing Type C-Cushion Trunnion Mount, Greaseable Triple Lip Seals
Number of Shanks 15
Shank Type Auto-Reset
Shank Spacing 15 in. (381 mm)
Shank Mounts Wrap-Around Design
Shank Arms 5 in. x 3 in. x 0.375 in. (127 x 76.2 x 9.5 mm)
Point Load - Auto Reset 1,750 lbs. (794 kg)
Trip Height 14 in. (356 mm)
Shank Size 1.25 in. x 2.5 in. (31.8 x 63.5 mm)
Standard Shovels 4 in. (102 mm) Twisted
Point Angle 50 or 60 Degree
Shank Offset 12 in. (305 mm) on Rear Bar
Under Frame Clearance 32 in. (813 mm)
Frame 6 in. x 4 in. x 0.375 in. (152 x 102 x 9.5 mm)
Frame Construction Laser Cut/Matchcut Components, Robotically Welded
Transport Lift Axles 5.5 in. (140 mm) with UHMW Maintenance Free Pivots
Transport Axle Type Walking Tandems with Greaseable Pivots
Tire Size - Main Frame (4) 340/65R x 18 Radial Tires
Wheel Hubs - Main Frame 8-Bolt
Spindles - Main Frame 3 in. (76.2 mm) Slip-In Spindles
Tire Size - Wing Frame N/A
Wheel Hubs - Wing Frame N/A
Spindles - Wing Frame N/A
Hitch Type Self-Leveling with Manual Adjustment
Hitch Category Cat. IV Ball, Single Lip with 2 in. (50.8 mm) Hole
Machine Depth Control Single Point, Front Mounted
Weight Kits Needed With Attachment - 3 Required
Safety Warning Lights and SMV Emblem Standard
Safety Chain Kit Standard
Adjustment Wrenches Standard
Powder Coat Paint, Blue Sapphire Standard
Cat. III Single Lip Hitch Clevis Optional
Cat. IV Single Lip Hitch Clevis Standard
Cat. V Single Lip Hitch Clevis N/A
2 in. Straight Points Optional
3 in. Twisted Shovels Optional
Rear Hitch Optional
Rear Hitch With Hydraulic Hoses Optional
Spare Tire & Wheel Assembly Optional
Horsepower Requirements 20 to 30 HP (15 to 22 kW) per Shank

 

2100 Series Coulter Chisel with Rigid Shear Bolt Shanks

Product Attributes 2112-15
Approximate Weight 16,140 lbs. (7,320 kg)
Working Width 18 ft. 9 in. (5.7 m)
Transport Width 19 ft. 4 in. (5.9 m)
Transport Height N/A
Number of Coulter Blades 31
Blade Spacing 7.5 in. (191 mm)
Blade Size 22 in. x 0.25 in. (559 x 6.4 mm)
Coulter Protection Spring Cushioned/C-Flex
Blade Scrapers Heavy-Duty 0.3125 in. x 6 in. (7.9 x 152 mm)
Blade Scraper Mount C-Cushion Mounted
Gang Spools 5.75 in. (146 mm) Diameter Solid Cast
Gang Shaft 1.75 in. (44.5 mm) Round
Number of Bearings 8
Gang Bearing Type C-Cushion Trunnion Mount, Greaseable Triple Lip Seals
Number of Shanks 15
Shank Type Rigid Shear Bolt
Shank Spacing 15 in. (381 mm)
Shank Mounts Wrap-Around Design
Shank Arms 5 in. x 3 in. x 0.375 in. (127 x 76.2 x 9.5 mm)
Trip Height 14 in. (356 mm)
Shank Size 1.25 in. x 2.5 in. (31.8 x 63.5 mm)
Standard Shovels 4 in. (102 mm) Twisted
Point Angle 50 or 60 Degree
Shank Offset 12 in. (305 mm) on Rear Bar
Under Frame Clearance 32 in. (813 mm)
Frame 6 in. x 4 in. x 0.375 in. (152 x 102 x 9.5 mm)
Frame Construction Laser Cut/Matchcut Components, Robotically Welded
Transport Lift Axles 5.5 in. (140 mm) with UHMW Maintenance Free Pivots
Transport Axle Type Walking Tandems with Greaseable Pivots
Tire Size - Main Frame (4) 340/65R x 18 Radial Tires
Wheel Hubs - Main Frame 8-Bolt
Spindles - Main Frame 3 in. (76.2 mm) Slip-In Spindles
Tire Size - Wing Frame N/A
Wheel Hubs - Wing Frame N/A
Spindles - Wing Frame N/A
Hitch Type Self-Leveling with Manual Adjustment
Hitch Category Cat. IV Ball, Single Lip with 2 in. (50.8 mm) Hole
Machine Depth Control Single Point, Front Mounted
Weight Kits Needed With Attachment - 3 Required
Safety Warning Lights and SMV Emblem Standard
Safety Chain Kit Standard
Adjustment Wrenches Standard
Powder Coat Paint, Blue Sapphire Standard
Cat. III Single Lip Hitch Clevis Optional
Cat. IV Single Lip Hitch Clevis Standard
Cat. V Single Lip Hitch Clevis N/A
2 in. Straight Points Optional
3 in. Twisted Shovels Optional
Rear Hitch Optional
Rear Hitch With Hydraulic Hoses Optional
Spare Tire & Wheel Assembly Optional
Horsepower Requirements 20 to 30 HP (15 to 22 kW) per Shank