White's Farm Supply
Canastota
(315) 697-2214
4154 State Route 31
Canastota, NY 13032
Call Us
Directions
Franklin
(607) 829-2600
387 Center Street
Franklin, NY 13775
Call Us
Directions
Lowville
(315) 376-0300
8207 State Route 26
Lowville, NY 13367
Call Us
Directions
Schaghticoke
(518) 753-2237
1205 State Route 40
Schaghticoke, NY 12154
Call Us
Directions
Waterville
(315) 841-4181
962 State Route 12
Waterville, NY 13480
Call Us
Directions
Shop Parts

Landoll 2132-21

New Equipment / All Lines / Primary Tillage / 2100 Coulter Chisel / 2132-21

Double tap to zoom

 

Features

Size Heavy Residue and Eliminate Compaction

  • 22” Coulters on 7 ½” Spacing with Depth Gauge Indicator
  • 1 ¾” Gang Bolt
  • 5 ¾” Solid Cast Spools
  • C-Cushion Bearing Standards with Trunnion Bearings with Triple Lip Seal
  • Scraper Mounted Bracket Attached to C-Cushion Bearing Standard
  • Auto-Reset Shank Assemblies with 1,750 lb. Point Load, 14” Trip Height, 32” Under Frame Clearance, Adjustable 50 or 60 Degree Point Angle
  • Rigid Shear Bolt Shanks with 32” Under Frame Clearance
  • Choice of Twisted Shovels or Straight Points
  • 5 ½” Lift Axles with Maintenance Free Lift System
  • Walking Tandems with Greaseable Bearings on all Sizes
  • 340/65R x 18 Radial Tires with 8-Bolt Hubs and 3” Slip-In Spindles on Rigid Models and Wings of Folding Units
  • 400/60R x 18 Radial Tires with 8-Bolt Hubs and 3 ¼” Slip-In Spindles on Center Sections of Folding Units
  • Self-Leveling Hitch with Manual Adjustment
  • Single Point, Front Mounted Depth Control
  • Adjustment and Gang Wrench
  • Sapphire Blue Powder Coat Paint

Specifications

2100 Series Coulter Chisel with Auto Reset Shanks

Product Attributes 2132-21
Approximate Weight 30,485 lbs. (13,828 kg)
Working Width 26 ft. 3 in. (8.0 m)
Transport Width 15 ft. 6 in. (4.7 m)
Transport Height 13 ft. 5 in. (4.1 m)
Number of Coulter Blades 43
Blade Spacing 7.5 in. (191 mm)
Blade Size 22 in. x 0.25 in. (559 x 6.4 mm)
Coulter Protection Spring Cushioned/C-Flex
Blade Scrapers Heavy-Duty 0.3125 in. x 6 in. (7.9 x 152 mm)
Blade Scraper Mount C-Cushion Mounted
Gang Spools 5.75 in. (146 mm) Diameter Solid Cast
Gang Shaft 1.75 in. (44.5 mm) Round
Number of Bearings 12
Gang Bearing Type C-Cushion Trunnion Mount, Greaseable Triple Lip Seals
Number of Shanks 21
Shank Type Auto-Reset
Shank Spacing 15 in. (381 mm)
Shank Mounts Wrap-Around Design
Shank Arms 5 in. x 3 in. x 0.375 in. (127 x 76.2 x 9.5 mm)
Point Load - Auto Reset 1,750 lbs. (794 kg)
Trip Height 14 in. (356 mm)
Shank Size 1.25 in. x 2.5 in. (31.8 x 63.5 mm)
Standard Shovels 4 in. (102 mm) Twisted
Point Angle 50 or 60 Degree
Shank Offset 12 in. (305 mm) on Rear Bar
Under Frame Clearance 32 in. (813 mm)
Frame 6 in. x 4 in. x 0.375 in. (152 x 102 x 9.5 mm)
Frame Construction Laser Cut/Matchcut Components, Robotically Welded
Transport Lift Axles 5.5 in. (140 mm) with UHMW Maintenance Free Pivots
Transport Axle Type Walking Tandems with Greaseable Pivots
Tire Size - Main Frame (4) 400/60R x 18 Radial Tires
Wheel Hubs - Main Frame 8-Bolt
Spindles - Main Frame 3.25 in. (83 mm) Slip-In Spindles
Tire Size - Wing Frame (4) 340/65R x 18 Radial Tires
Wheel Hubs - Wing Frame 8-Bolt
Spindles - Wing Frame 3 in. (76.2 mm) Slip-In Spindles
Hitch Type Self-Leveling with Manual Adjustment
Hitch Category Cat. IV Ball, Single Lip with 2 in. (50.8 mm) Hole
Machine Depth Control Single Point, Front Mounted
Weight Kits Needed With Attachment - 3 Required
Safety Warning Lights and SMV Emblem Standard
Safety Chain Kit Standard
Adjustment Wrenches Standard
Powder Coat Paint, Blue Sapphire Standard
Cat. III Single Lip Hitch Clevis N/A
Cat. IV Single Lip Hitch Clevis Standard
Cat. V Single Lip Hitch Clevis Optional
2 in. Straight Points Optional
3 in. Twisted Shovels Optional
Rear Hitch Optional
Rear Hitch With Hydraulic Hoses Optional
Spare Tire & Wheel Assembly Optional
Horsepower Requirements 20 to 30 HP (15 to 22 kW) per Shank

 

2100 Series Coulter Chisel with Rigid Shear Bolt Shanks

Product Attributes 2132-21
Approximate Weight 26,410 lbs. (11,979 kg)
Working Width 26 ft. 3 in. (8.0 m)
Transport Width 15 ft. 6 in. (4.7 m)
Transport Height 13 ft. 5 in. (4.1 m)
Number of Coulter Blades 43
Blade Spacing 7.5 in. (191 mm)
Blade Size 22 in. x 0.25 in. (559 x 6.4 mm)
Coulter Protection Spring Cushioned/C-Flex
Blade Scrapers Heavy-Duty 0.3125 in. x 6 in. (7.9 x 152 mm)
Blade Scraper Mount C-Cushion Mounted
Gang Spools 5.75 in. (146 mm) Diameter Solid Cast
Gang Shaft 1.75 in. (44.5 mm) Round
Number of Bearings 12
Gang Bearing Type C-Cushion Trunnion Mount, Greaseable Triple Lip Seals
Number of Shanks 21
Shank Type Rigid Shear Bolt
Shank Spacing 15 in. (381 mm)
Shank Mounts Wrap-Around Design
Shank Arms 5 in. x 3 in. x 0.375 in. (127 x 76.2 x 9.5 mm)
Trip Height 14 in. (356 mm)
Shank Size 1.25 in. x 2.5 in. (31.8 x 63.5 mm)
Standard Shovels 4 in. (102 mm) Twisted
Point Angle 50 or 60 Degree
Shank Offset 12 in. (305 mm) on Rear Bar
Under Frame Clearance 32 in. (813 mm)
Frame 6 in. x 4 in. x 0.375 in. (152 x 102 x 9.5 mm)
Frame Construction Laser Cut/Matchcut Components, Robotically Welded
Transport Lift Axles 5.5 in. (140 mm) with UHMW Maintenance Free Pivots
Transport Axle Type Walking Tandems with Greaseable Pivots
Tire Size - Main Frame (4) 400/60R x 18 Radial Tires
Wheel Hubs - Main Frame 8-Bolt
Spindles - Main Frame 3.25 in. (83 mm) Slip-In Spindles
Tire Size - Wing Frame (4) 340/65R x 18 Radial Tires
Wheel Hubs - Wing Frame 8-Bolt
Spindles - Wing Frame 3 in. (76.2 mm) Slip-In Spindles
Hitch Type Self-Leveling with Manual Adjustment
Hitch Category Cat. IV Ball, Single Lip with 2 in. (50.8 mm) Hole
Machine Depth Control Single Point, Front Mounted
Weight Kits Needed With Attachment - 3 Required
Safety Warning Lights and SMV Emblem Standard
Safety Chain Kit Standard
Adjustment Wrenches Standard
Powder Coat Paint, Blue Sapphire Standard
Cat. III Single Lip Hitch Clevis N/A
Cat. IV Single Lip Hitch Clevis Standard
Cat. V Single Lip Hitch Clevis Optional
2 in. Straight Points Optional
3 in. Twisted Shovels Optional
Rear Hitch Optional
Rear Hitch With Hydraulic Hoses Optional
Spare Tire & Wheel Assembly Optional
Horsepower Requirements 20 to 30 HP (15 to 22 kW) per Shank