Landoll 2410AFG-7-24

Double tap to zoom

 

Features

Sorry, currently there are no features but check back with us later.

Specifications

Product Attributes 2410AFG-7-24
Approximate Weight 22,750 lbs. (10,319 kg)
Working Width 14 ft. 0 in. (4.3 m)
Transport Width 14 ft. 8 in. (4.5 m)
Transport Height 12 ft. 1 in. (3.7 m)
Number of Disc Blades - Front 18
Number of Disc Blades - Rear 20
Blade Spacing - Front 10.5 in. (267 mm)
Blade Spacing - Rear 10.5 in. (267 mm)
Blade Sizes 24 in. x 0.25 in. (610 x 6.4 mm) Rollable
  24 in. x 0.25 in. (610 x 6.4 mm)
  26 in. x 0.25 in. (660 x 6.4 mm)
  26 in. x 0.3125 in. (660 x 7.9 mm)
Blade Concavity 3 in. (76.2 mm)
Blade Scrapers 4.5 in. (114 mm) Adjustable
Blade Scraper Mount Heavy-Duty 0.5 in. (12.7 mm) Spring Steel Arm
Gang Spools - Front 5.5 in. (140 mm) Diameter
Gang Spools - Rear 5.5 in. (140 mm) Diameter
Gang Angle 15 Degrees Non- Adjustable
Gang Shaft 1.75 in. (44.5 mm) Round
Number of Gang Bearings - Front 6
Number of Gang Bearings - Rear 6
Gang Bearing Type C-Cushion Trunnion Mount, Greaseable Triple Lip Seals
Number of Shanks 7
Shank Spacing 24 in. (610 mm)
Shank Depth (Maximum) 16 in. (406 mm)
Shank Mounts Semi-Wrap Around with 1 in. (25.4 mm) U-bolts
Point Load - Auto Reset 3,600 lbs. (1633 kg)
Trip Height 16 in. (406 mm)
Shank Size 1.25 in. x 4 in. (31.8 x 102 mm)
Shank Type Auto-Reset Parabolic
Standard Points 2.375 in. (60.3 mm) V-Cap with Wear Guard
Frame 8 in. x 4 in. x 0.375 in. (203 x 102 x 9.5 mm) and 6 in. x 4 in. x 0.375 in. (153 x 102 x 9.5 mm)
Frame Construction Laser Cut/Matchcut Components, Robotically Welded
Transport Lift Axles 5.5 in. (140 mm) with UHMW Maintenance Free Pivots
Transport Axle Type Walking Tandems with Greaseable Pivots
Tire Size - Main Frame (4) 440/55R x 18-14
Wheel Hubs - Main Frame 8-Bolt
Spindles - Main Frame 4 in. (102 mm) Slip-In Spindles
Tire Size - Wing Frame N/A
Wheel Hubs - Wing Frame N/A
Spindles - Wing Frame N/A
Hitch Type Self-Leveling with Manual Adjustment
Hitch Category Cat. IV Single Lip with 2.25 (57.2 mm) Hole
Machine Depth Control Single Point, Front Mounted
Safety Warnings Lights and SMV Emblem Standard
Safety Chain Kit Standard
Adjustment Wrenches Standard
Powder Coat Paint, Blue Sapphire Standard
Rear Jack Standard
Cat. III Single Lip Hitch Clevis (2 in. Hole) Optional
Cat. V Single Lip Hitch Clevis (3 in. Hole) Optional
Shark Fin Point Optional
7 in. Wing Point Optional
Spare Tire & Wheel Assembly Optional
Rigid Shear Bolt Shank Optional
Horsepower Requirements 50 HP and up (27 kW) per Shank