Landoll 2511N-4-30

Double tap to zoom

 

Features

Extra Tough Features For Deep Tillage

  • 6” x 6” Rear and 6″ x 4″ Front Frame Construction
  • Cat. II, III Narrow Three-Point Hitch for Narrow Non-Folding Models
  • Cat. III, IV Three-Point Hitch for Standard Non-Folding Models and Folding Models
  • Heavy-Duty Pull Hitch Caddy Included on Larger Folding Models
  • 40 ½” Under Frame Clearance
  • Maximum Working Depth of 20” on HD Hydraulic Auto-Reset Models and Rigid Shear Bolt Models; 16″ on Auto-Reset Spring Shank Models
  • Heavy-Duty Coulter Assemblies with 22” Smooth Blades
  • 600 lbs. of Down Pressure on Coulter Assemblies
  • Coulter Assemblies – 6” Trip Height
  • Turnbuckle Adjustable Gauge Wheels with 280/70R x 15 Radial Tires
  • Parking Stands
  • Powder Coat Paint
  • LED Warning Lights & SMV Emblem

 

Versatility & Reliability

  • Auto-Reset Spring, HD Hydraulic Auto-Reset or Rigid Shear Bolt Shank Assemblies
  • Choice of Straight Leg Shanks, Parabolic Shanks or Low Disturbance Shanks
  • Variety of Points and Wearstrips Available
  • 16” Trip Height on Auto-Reset Spring Shank Models with 2,300 lbs. of Point Load
  • 28″ Trip Height on Hydraulic Auto-Reset Shank Models with a Massive 4,000 lbs. of Point Load
  • Options Available for Coulter Assemblies

Specifications

2500 Series In-Row Ripper Auto Reset Spring Shanks, Non-Folding Units

Product Attributes 2511N-4-30
Approximate Weight 3,849 lbs. (1,746 kg)
Working Width 10 ft. 0 in. (3.0 m)
Transport Width 9 ft. 3 in. (2.8 m)
Frame Type Narrow Non-Folding
Frame Structure 6 in. x 4 in. (152 x 102 mm) Double Bar Frame
Frame Construction Laser Cut Components; Robotically Welded
Frame Extensions None
Coulter Assemblies Standard
Number of Coulters 4
Coulter Blade Diameter 22 in. (559 mm) Smooth Blade (Standard)
Coulter Protection Adjustable Spring Cushion
Coulter Down Pressure 600 lbs. (272 kg)
Coulter Trip Height 6 in. (152 mm)
22 in. Ripple Coulter Optional
22 in. Pyramid Coulter Optional
Number of Shanks 4
Shank Type Auto-Reset Spring Shank
Shank Leg Type* 1.25 in. x 5 in. x 36 in. (32.8 x 127 x 914 mm) Straight Leg Shank
1.25 in. x 4 in. x 36 in. (32.8 x 102 x 914 mm) Parabolic Shank
0.75 in. x 5 in. x 32 in. (19 x 127 x 813 mm) Low Disturbance Shank
Shank Spacing 30 in. (762 mm)
Maximum Shank Working Depth 16 in. (406 mm)
Shank Trip Height 16 in. (406 mm)
Point Load 2,300 lbs. (1,043 kg)
Under Frame Clearance 40.5 in. (1.0 m)
Points for Straight Leg Shanks 2 in. (50.8 mm) V-Shaped Cast C.A.D.I. Point (Standard)
Wearstrips for Straight Leg Shanks C.A.D.I. Reversible Wearstrip (Standard)
Points for Parabolic Shanks 2.375 in. (60.3 mm) V-Cap C.A.D.I. Point (Standard)
Shark Fin Point (Optional)
7 in. (178 mm) Wing Point (Optional)
Wearstrips for Parabolic Shanks C.A.D.I. Wearstrip (Standard)
Points for Low Disturbance Shanks 2 in. (50.8 mm) V-Shaped Cast Point (Standard)
Wearstrips for Low Disturbance Shanks 0.75 in. (19 mm) Wearstrip (Standard)
Gauge Wheels (2) Standard
Gauge Wheel Type Turnbuckle Adjustable
Gauge Wheel Hubs 6-Bolt
Gauge Wheel Tire Size HD 280/70R x 15
Three-Point Hitch Cat. II, IIIN
Coverboard Kit Optional
12 in. Offset Shank Mounts Optional
Pull-Hitch Caddy N/A
Rear Hitch Optional
Parking Stands Standard
Powder Coat Paint, Sapphire Blue Standard
LED Warning Lights & SMV Emblem Standard
Horsepower Requirements 40 HP and up (30 kW) Per Shank
Recommended Operating Speed 3 to 5 MPH (4.8 to 8.0 km/h)

 * Units are equipped with choice of Straight Leg Shanks, Parabolic Shanks or Low Disturbance Shanks. Points and Wearstrips listed above as Standard are included with each respective shank choice, unless Optional equipment is chosen.

Specifications subject to change with or without notice.