Meyer Farm V-Force 7400 Truck

Double tap to zoom



  • Pull Type or Truck Mount models available
  • Meyer patented straight-line flow - provides the ultimate spread performance. Better pattern, faster unload time, less horsepower & minimal wind drift!
  • Rear Unload Rules! When it comes to spreading, keep the mess behind you. Provides superior application too.
  • 3 auger system, only one of its kind! Lower 20" augers feed the door while the upper 13" auger levels the load forward and eliminates bridging.
  • Thanks to the dual lower auger arrangement, the Meyer spreader body is wide down low. This means we can maintain a lower load height with maximum capacity!
  • independent Lower Auger Shear Bolt Protection, a Meyer exclussive. Allows you to protect an obstructed auger while still unloading a majority of the load with the other auger. Bound to save you work!
  • Heavy Duty Drivetrain - V-Force models feature #120 final drive chains #80 expeller and first reduction. HD jackshafts / spring chain tensioning / remote greasing on hard to reach spots!
  • Automatic Roller Chain Oiler is standard. Oils all roller chains each time you cycle the tailgate. Eliminates reduced access and manure contamination associated with oil bath systems.
  • Sectionally Flighted 20" Lower Augers propel material to the rear of the spreader. Full auger flighting / No Paddles to wrap, freeze or wedge material
  • Our Revolutionary T-Post auger hold-down retains a nylatron (non maintenance) bushing and maintains tight auger tollerance to the tank floor. Provides you more complete cleanout!
  • Vertical Twin Expellers pulverize material for smooth, even application. This machine bands material across the back like a ferilizer spreader would, unlike side delivery units that attempt to chuck all the product out one side. Paddles are replacable and reversible!
  • Check out this Shock Load Coupler System....Drastically reduces "shock/stress" related to rocks and frozen material to your drivetrain. This dampening system combined with a torque disconnect clutch protect your expeller drive sytem.
  • Direct shaft drive expellers (includes our shock load coupler). No chains on the rear of this spreader. V-Force models feature an overrunning clutch system to reduce backlash on the drivetrain.
  • 540 CV PTO is standard - 1000 CV PTO is optional. Both incorporate a torque disconnect clutch to protect your investment.
  • All Meyer spreaders feature a full channel frame. Stress from the hitch, axles and body are transmitted throught the frame network. Take a look at the unibody design on most V-Spreaders.
  • Standard Hitch / Optional Hitch
    The 7400 Model features a standard V-Hitch / the 7500 Model comes standard the long hitch package.  (7500 pictured here with long hitch)
  • HD Axle System
    This HD, offset A-Frame tandem on the V-Force models features 3" spindles on a 7500  (2 3/4" spindles on 7400) - both are 8 bolt.   10 bolt hub/spindle option available on 7500 model.
  • Many tire options available including rib implement tires and used truck tires.
  • Angle splash shields standard front and rear on 7500; Elevated front splash shield and flat rear splash shield on 7400 model.
  • LED turn signal lighting standard / Center Lift Door
  • The center lift door system eliminates arms and linkages - it is standard on the 7500 model
  • Hydraulic Lid Option
  • This Hydraulic Lid feature provides cleaner transportation and less odor pollution.   Right or Left hinge available and a port hole is standard equipment. (7500 only)
  • Extension Package
    This 4" side extension is available for the 7400.   It increase it's capacity to 465 bushel or 2,150 gallons.
  • Scale Package
    The 7500 Model is available with a 5 point scale package.   Basic or Nutrient Tracker versions available.


Model V-Force 7400 Trailer Model
Bushels Heaped 400
Gallons/Cu. ft. (struck) 1870/250
Cu. Yards (struck) 9.26 cu. yards
Overall Length 21'9"
Inside Tank Length 15'
Loading Height 66" w/14L x 16.1; 67.5" w/16.5L x 16.1
Overall Height - Top of Splash Guard 73.25" (front) 14L; 74.75" (front) 16.5L
Overall Width Outside Tires 95.75" w/14L x 16.1; 102.75" w/16.5L
Width - top of tank 77 3/4"
Total Weight 8040# w/14L
Maximum Load Net (Lbs.) 16,000#
Lower Auger Diameter 20"
Lower Auger Thickness 3/8" sectional
Independent Lower Auger Shear Hub Sprockets Standard
3rd Auger (for solid material) Standard
Drive - PTO-RPM 540 RPM Constant Velocity
Drive Line Protection Overrunning torque disconnect clutch w/shear bolt augers
Roller Chain Drive - augers- expellers #80 - #120; #80
Roller Chain Auto Oiler Standard
Expeller Speed (RPM) 660 RPM
Expeller Diameter 22"
Material Copper bearing steel
Thickness - Tank Sides 3/16"
Thickness - Front/Back Panel 3/16"
Frame Construction Heavy 8" channel
Door Opening 27" x 42"
Spindle Diameter-tandem axle 2 3/4" sleeved
Hub 8 bolt
Splash Shields - front & rear Standard - flat (low clearance)
Transport Light Kit Standard w/ag cord
Tractor Requirement PTO HP (Min.) 85
1000 RPM Kit Optional
19" Longer Hitch (for dual wheeled tractor) Optional
Hydraulic Controlled Lid Optional
Poultry Litter Package Optional
Safety Chain/SMV Optional
Truck Mount Version Optional