White's Farm Supply
Canastota
(315) 697-2214
4154 State Route 31
Canastota, NY 13032
Call Us
Directions
Franklin
(607) 829-2600
387 Center Street
Franklin, NY 13775
Call Us
Directions
Lowville
(315) 376-0300
8207 State Route 26
Lowville, NY 13367
Call Us
Directions
Schaghticoke
(518) 753-2237
1205 State Route 40
Schaghticoke, NY 12154
Call Us
Directions
Waterville
(315) 841-4181
962 State Route 12
Waterville, NY 13480
Call Us
Directions
Shop Parts

Sunflower 7610 & 7630 Strip Till

New Equipment / All Lines / Sunflower / Tillage Tools / Strip-Till Tools / 7600 Series / 7610 & 7630 Strip Till

Double tap to zoom

 

Features

COULTER BLADE

The coulter blades cut deep, slicing through surface and subsurface residue to eliminate interference with the shank. Depth bands on the coulter blades ensure row-unit depth and stabilize the tool. The all-welded coulter assemblies are an integral part of the row unit. Adjustable scrapers clean the blade and the depth band, enabling the unit to work through tough conditions. Two heavy-duty sealed bearings in each hub minimize daily maintenance.

SHANK ASSEMBLY

The 1/2 x 3 x 24-inch mole knife shank shatters compaction in the root zone, allowing root systems to go deep for soil moisture and nutrients. Shank depth is adjustable in 2-inch increments with an effective working range of 4 to 10 inches deep. The 15-degree mole point creates the perfect environment for a concentration zone of NH3 or liquid fertilizer. Many different knives, points and fertilizer delivery systems are available, making this tool customizable for any program.

BERMING BLADES

The 16-inch-diameter wavy blades are fully adjustable, with a 4-inch vertical range and up to 10-degree blade-angle adjustment. The berming blades are mounted close to the tillage shank so they can capture the tilled soil and build a berm of optimum shape and height.

BERM REEL

Consisting of 1/4 x 1 1/4 x 12-inch concave bars, this large diameter x 12-inch-wide reel is key to sculpting and conditioning the berm. Particulate size, firmness and berm shape are greatly determined by the berm reel. Spring down pressure can be adjusted from 0 to 125, customizing the berm for all applications.

ROW-UNIT MOUNTING

Heavy-duty springs are easily adjusted in increments of 25 pounds of down pressure per revolution. A full 10 inches of vertical travel has been engineered into the wide-set parallel linkage. Parallel linkage allows each row unit to work independently from the tool bar, which maintains the shank and blade settings.

TRAIL HITCH

The heavy-duty rear tow hitch is equipped with a 3-inch single-lip clevis and rear parking stand.

 

  • 30" (762 mm) row spacing
  • Parallel linkage with spring down pressure
  • Shear Bolt or Spring Trip
  • 24" (559 mm) x .25" (6.35 mm) coulter blade with depth band
  • 13" (330 mm) spoke trash whippers
  • 1" (25 mm) x 3" (75 mm) x 24" (610 mm) shank
  • 16" (406 mm) wavy berming disc blades
  • 12" (305 mm) rolling baskets
  • Available Models: 7610-20, 7630-30, 7630-30 NT

Specifications

ModelWorking width rows (spacing in (mm))Transport width ft (m)Transport height ft (m)Weight lbs (kg)Power requirements
7610-20 8 (30” (190.5)) 20.67’ (6.3) N/A 7,250 (3,289) 20 to 25 hp per shank
7630-30 NT 12 (30” (190.5)) 15.75’ (4.8) N/A 11,700 (5,307) 20 to 25 hp per shank
7630-30 12 (30” (190.5)) 20.42’ (6.2) N/A 11,700 (5,307) 20 to 25 hp per shank