Worksaver ESCG-48JD

Double tap to zoom

 

Features

  • 12-volt linear actuator with 8-inch stroke operates the grapple clamp
  • Includes wiring harness for direct connection to the tractors’ battery
  • Pre-wired rocker switch controls the grapples’ linear actuator
  • Designed for sub-compact tractors up to 32 horsepower

 

The Grapple Rake is designed for handling loose logs, trees, stumps, brush, or other loose material. It is not designed for bulldozing. The rake frame is not designed to bulldoze out stumps or buried rocks. DO NOT turn when tines are in ground. To prevent damage to the grapple clamp arm, DO NOT use the grapple clamp to push or lift trees, logs, or stumps. DO NOT use the grapple clamp arm to rake or pull material back. The grapple clamp is designed for holding material against the rake main frame for handling only. It is NOT built for pushing, pulling, raking, or lifting heavy objects.

Specifications

Model ESCG-48JD
Overall Width (in/mm) 49 / 1245
Mount Type JD Hook & Pin
Overall Height Closed (in/mm) 41.5 / 1054
Grapple Opening (in/mm) 31 / 787
Upper Grapple Width (in/mm) 28.25 / 718
Lower Grapple Width (in/mm) 49 / 1245
Tine Spacing (in/mm) 9.25 / 235
Number of Tine/Grapple (lower/upper) 6 / 3
Type of Linear Actuator 12-volt, IP65 Rated
Actuator Stroke (in/mm) 8 / 203
Weight (lbs/kg) 240 / 109
Product No.  811885