White's Farm Supply
Canastota
(315) 697-2214
4154 State Route 31
Canastota, NY 13032
Call Us
Directions
Franklin
(607) 829-2600
387 Center Street
Franklin, NY 13775
Call Us
Directions
Lowville
(315) 376-0300
8207 State Route 26
Lowville, NY 13367
Call Us
Directions
Schaghticoke
(518) 753-2237
1205 State Route 40
Schaghticoke, NY 12154
Call Us
Directions
Waterville
(315) 841-4181
962 State Route 12
Waterville, NY 13480
Call Us
Directions
Shop Parts

Gehl AL550

New Equipment / All Lines / Articulated Loaders / Articulated Loaders / AL550

Double tap to zoom

 

Features

Pound-for-pound packed with power, the AL550 and its Z-kinematic loader arm features unmatched break-out forces to take on the toughest challenges. Small yet powerful, this machine's responsive hand throttle and 2-speed hydrostatic transmission get you to the task at hand with speeds up to 18 MPH, and its front and rear differential locks ensure you have traction exactly when and where you need it. In other words, this machine is like you—ready to get the job done.

Specifications

Capacities Imperial
Static tipping load with bucket (straight) 4828 lbs
Static tipping load with bucket (full turn) 3732 lbs
Static tipping load with forks (straight) 3411 lbs
Static tipping load with forks (full turn) 2654 lbs
Max. height of bucket pivot point 10 ft 4 in
Reach at max. height 1 ft 5 in
Breakout force with bucket 4329.46 daN
Static tipping load with bucket - Straight with cab 4828 lbs
Static tipping load with bucket - Full turn with cab 3732 lbs
Static tipping load with pallet forks - Straight with cab 3411 lbs
Weight and dimensions  
Unladen weight (with forks) with 4-post canopy 7470 lbs
Ground clearance 10 in
Overall length to carriage (with hitch) 13 ft 9 in
Wheelbase 69 in
Overall width of 4 posts canopy 4 ft
Overall cab width 4 ft 
Overall width (over tyres) 4 ft 10 in
Overall height with 4 posts canopy 7 ft 7 in
Overall height with cab 7 ft 7 in
Tilt-up angle 39.90 °
Tilt-down angle 44.70 °
External turning radius (over tyres) 10 ft 6 in
Articulation angle 45 °
Performances  
Crowd 2.52 s
Dump 1.85 s
Engine  
Engine Brand Deutz
Engine model TD 2.2 L3
Number of cylinders / Capacity of cylinders 3 - 21 in³
I.C. Engine power rating / Power (kW) 60 Hp / 45.50 kW
Max. torque / Engine rotation 200 Nm / 2400 rpm
Engine cooling system 2 radiators water + hydraulic oil
Transmission  
Transmission type Hydrostatic
Number of gears (forward / reverse) 2 / 2
Max. travel speed (may vary according to applicable regulations) 18 mph
Differential lock Machine Lock Rear & front
Parking Brake Manual
Hydraulics  
Hydraulic pump type Gear pump
Hydraulic flow - Pressure 15 US gpm / 3046 PSI
High-Flow Option (l/min) 19 US gpm
Drive hydraulic system pressure 6092 PSI
Tank capacities  
Hydraulic oil 12 US gal
Fuel tank 22 US gal
Miscellaneous  
Safety cab homologation Cabin ROPS - FOPS Level 1