Gehl RT185
Features
At 1,850 lbs. of rated operating capacity this machine is not to be underestimated. The IdealAccess fold up door makes entering and exiting the cab a piece of cake. On wet, dirty, muddy jobsites this track loader shines. Visit a dealer today to get behind these operator and maintenance friendly hydraulic pilot controls. Daily tasks change and this machine is suitable to be your army knife multi-tool that fits every job perfectly.
Specifications
| Capacities | Imperial |
| Operating Weight | 9101 lbs |
| Operating Capacity at 35% Tipping Load | 1850 lbs |
| Operating Capacity At 50% Tipping Load | 2643 lbs |
| Tipping capacity | 5287 lbs |
| Weight and dimensions | |
| Overall Operating Height - Fully Raised | 168 in |
| Height to Hinge Pin - Fully Raised | 128 in |
| Reach - Fully Raised | 34 in |
| Dump angle at full height | 40.20 ° |
| Dump Height - Fully Raised | 98 in |
| Overall Height to Top of ROPS | 83 in |
| Overall length with bucket | 148 in |
| Overall Length without Bucket | 115 in |
| Specified Height | 68 in |
| Reach at Specified Height | 31 in |
| Dump angle at specified height | 66.80 ° |
| Maximum Rollback Angle at Ground | 30 ° |
| Carry Position | 8 in |
| Maximum Rollback Angle at Carry Position | 31.60 ° |
| Digging Position | 1 in |
| Angle of Departure with STD Counterweight | 30.40 ° |
| Ground clearance | 13 in |
| Track gauge | 52 in |
| Track Shoe Width | 13 in |
| Crawler base | 54 in |
| Overall width less bucket | 64 in |
| Bucket Width | 66 in |
| Clearance Radius - Front with Bucket | 91 in |
| Clearance Circle - Rear | 66 in |
| Track Type / Track Rollers / Roller Type | Rubber / 4 / Steel |
| Performances | |
| Track Type / Track Rollers / Roller Type | 6 mph |
| Drawbar Pull/Tractive Effort | 10218 lbs |
| Bucket Breakout - Tilt Cylinder | 5355 lbs |
| Bucket Breakout - Lift Cylinder | 5016 lbs |
| Engine | |
| Engine Brand | Yanmar |
| Engine model | 4TNV98CT-XNMSV Stage V |
| Motor Type | Axel Piston with planetary gear box reduction |
| Gross Power (kW) / Gross Power | 2 kW / 2500 rpm |
| Battery | 12 V |
| Cold Cranking Amps at Temperature (CCA) | 850 A |
| Alternator - Voltage / Ampere | 14 V / 100 A |
| Hydraulics | |
| Standard flow - Auxiliary hydraulics | 18 US gpm |
| Tank capacities | |
| Hydraulic tank capacity | 11 US gal |
| Fuel tank | 24 US gal |
| Displacement / Number of cylinders | 0.88 US gal / 4 |
